VT&C Catalogs & Literature

VT&C Vacuum Components and Systems Catalog & Literature

15 listings found for: Fil-Tech

Fil-Tech FT704 & FT705 Silicone Fluids for Diffusion Pumps, Replaces DC704 and DC705 Fluids

Fil-Tech stocks FT704, FT702, and FT705 silicone fluids for diffusion pumps which are direct replacements for the discontinued Dow Corning DC704 and DC705 fluids. FT704 and FT705 are functional equivalents to DC704 and DC705 and can be mixed and/or reprocessed together with their respective counterparts in any proportion. Fil-Tech FT704 and FT705 fluids offer significant savings for 1 and 5 gallon quantities and we can reprocesses your diffusion pump fluids. Fil-Tech also stocks Chemours Krytox PFPE oils and greases, hydrocarbon pump oils, and Santovac 5. Fil-Tech supplies Quality Crystals® in 6MHz and 5MHz, electron beam gun replacement parts, crucible liners, ion source parts, ionization and thermocouple vacuum measurement gauges, and Alcatel and Varian style leak detector filaments. Call 617-227-1133 for our 2018 Fil-Tech Catalog or email paula@filtech.com or visit www.filtech.com and order online.

Fil-Tech
Boston, MA
http://www.filtech.com/
Contact: Paula L. Becker
Tel: 617-227-1133
Email: paula@filtech.com

Extreme Temperature Crystals™ from Fil-Tech

Fil-Tech announces NEW Extreme Temperature Crystals that are stable in the 200°C range. Our Extreme Temperature Crystals operate in the 200°C range with fewer rate spikes that are caused by high temperature processes. Our Extreme Temperature Crystals can be used with standard film monitors and controllers and are available in Gold, Silver and Stress Relieving Alloy ® coatings. Extreme Temperature crystals are ideal for processes utilizing excessive heat, including VD, OVPD and ALD. Contact Fil-Tech for samples. We also manufacture a complete line of 6MHz and 5MHz Quality Crystals® in Gold, Longer Life Gold®, and Stress Relieving Alloy® to measure your thin films. Gold offers low contact resistance and high chemical stability. Stress Relieving Alloy crystals dissipate stresses from deposited dielectrics to offer longer, jump free oscillation. We manufacture sensor head hardware including single and dual feedthroughs on 1” bolts or 2-3/4” flanges, single and dual sensor heads, and sputter heads in stainless steel and copper. Call 617-227-1133, paula@filtech.com, or www.filtech.com for online ordering.

Fil-Tech
Boston, MA
http://www.filtech.com/
Contact: Paula L. Becker
Tel: 617-227-1133
Email: paula@filtech.com

Fil-Tech’s NEW Quartz Crystal 6 Changer and Sensor Hardware

Introducing our new QI6100 Quartz Crystal 6 Changer that holds 6 crystals to rotate a new crystal into position for uninterrupted deposition monitoring. QI6100 is competitively priced at $13,500, has a flat or 45° angle head, and operates to 350 °C with efficient cooling. We also manufacture a complete line of single and dual feedthroughs on 1” bolts or 2 ¾” flanges, single and dual sensor heads with shutters, bakeable heads, and sputter heads with internal oscillators in stainless steel and copper. We offer multi-film rate/thickness monitors including the SQM-220, SQM160, and SQM-200. We supply electron beam gun replacement parts for Temescal and Telemark emitters, electromagnetic coils, and OFHC copper crucibles and covers from stock. Fil-Tech supplies replacement parts for ion sources from Veeco Commonwealth Mark I and II and Ion Tech, and Satisloh. Fil-Tech manufactures Quality Crystals® in 6MHz and 5MHz styles with Gold, Longer Life Gold®, Stress Relieving Alloy®, and Extreme Temperature Crystals that operate to 200°C. Online ordering www.filtech.com, paula@filtech.com, or call 617-227-1133.

Fil-Tech
Boston, MA
http://www.filtech.com/
Contact: Paula L. Becker
Tel: 617-227-1133
Email: paula@filtech.com

Fil-Tech's SQM-220 Rate/Thickness Monitor

Fil-Tech's SQM-220 Rate/Thickness Monitor controls up to 8 shutters and up to 2 multi-crystal heads. The SQM220 features 6 channels for sensor inputs and has 2 channel inputs for active vacuum gauges. The SQM220 communicates with RS232/485 or Ethernet IP and is supplied with an oscillator and cables. Fil-Tech also manufactures 6MHz and 5MHz Quality Crystals® coated Gold, Longer Life Gold, and Stress Relieving Alloy® and all styles single and dual sensor heads, feedthroughs on 1” bolts and 2 ¾” flanges, and custom hardware. Try our sensor heads in copper for superior cooling. Introducing Fil-Tech’s NEW 6 Quartz Crystal Changer that holds 6 crystals to rotate a new crystal into position for uninterrupted deposition monitoring. Fil-Tech supplies electron beam gun and ion source replacement parts, crucible liners, Chemours Krytox and hydrocarbon fluids for mechanical pumps, FT704 and FT705 diffusion pump fluid, ionization and thermocouple gauges, and Alcatel and Varian style leak detector filaments. Call 617-227-1133, paula@filtech.com, or visit www.filtech.com for online ordering.

Fil-Tech
Boston, MA
http://www.filtech.com/
Contact: Paula L. Becker
Tel: 617-227-1133
Email: paula@filtech.com

Quality Crystals and Sensor Hardware from Fil-Tech

Fil-Tech manufactures 6MHz and 5MHz Quality Crystals® in Gold, Longer Life Gold®, Stress Relieving Alloy®, and Advanced Adhesion Alloy®. Gold offers low contact resistance and high chemical stability. Stress Relieving Alloy crystals dissipate stresses from deposited dielectric materials to offer longer, jump free oscillation. We now offer Extreme Temperature Crystals stable to 200°C. We also manufacture a complete line of sensor hardware including single and dual feedthroughs on 1” bolts or 2 3/4” flanges, single and dual sensor heads, and sputter heads in Stainless Steel or Copper and introducing our Bakeable Sensor Heads to 300°C and our QI6100, 6 Quartz Crystal Changer. Fil-Tech also stocks replacement parts for Temescal and Telemark electron beam guns, electromagnetic coils, and OFHC copper crucibles and covers. Fil-Tech supplies graphite, molybdenum and titanium crucible liners. We also stock replacement parts for Commonwealth and Ion Tech ion sources, and FT704 and Chemours Krytox oils and greases for your pumps. Call 617-227-1133, paula@filtech.com or www.filtech.com.

Fil-Tech
Boston, MA
http://www.filtech.com/
Contact: Paula L. Becker
Tel: 617-227-1133
Email: paula@filtech.com

Chemours Krytox PFPE fluids and Greases from Fil-Tech

Fil-Tech is an authorized distributor of Chemours Krytox oils and greases, including the 1506, 1514, 1525, 1514XP and 1525XP series oils, and General Purpose GPL Oils. We stock Chemours Krytox PFPE greases including Electronic Grade EG2000 and EG3000, General Purpose Lubricants GPL, Low Vapor Pressure LVP and Aerospace Grade 240 series greases. We can reprocess your used PFPE fluids for a fraction of the cost of new fluids. Fil-Tech also stocks FT704 and FT705 diffusion pump fluids, hydrocarbon oils FT19, FT20, FT21, FT77, and FTTW, and Santovac 5. Fil-Tech offers Quality Crystals®, electron beam gun replacement parts, crucible liners, ion source parts, ionization and thermocouple gauges, and Alcatel and Varian style leak detector filaments. Call 617-227-1133 for our 2018 Fil-Tech Catalog or email paula@filtech.com or visit www.filtech.com and order online.

Fil-Tech
Boston, MA
http://www.filtech.com/
Contact: Paula L. Becker
Tel: 617-227-1133
Email: paula@filtech.com

Fil-Tech’s Hydrocarbon Oils

Fil-Tech stocks hydrocarbon fluids in 1, 5, and 55 gallons sizes. We offer FT19, FT20, FT21, FT70, FT77, and FTTW. Our fluids are appropriate for mechanical pumps, rotary piston pumps, roots blowers, and diffusion pumps in a range of viscosities and vapor pressures. We stock Chemours Krytox 1500 and General Purpose PFPE inert fluids and PFPE greases including Electronic Grade EG2000 and EG3000, General Purpose Lubricants GPL, Low Vapor Pressure LVP and Aerospace Grade 240 series greases. We can reprocess your used PFPE fluids for a fraction of the cost of new fluids. Fil-Tech also stocks FT704 and FT705 diffusion pump fluid, Santovac 5 and Fil-Tech Fluid for increased bearing life in vacuum and semiconductor processes. Fil-Tech offers Quality Crystals® in 6MHz and 5MHz, electron beam gun replacement parts, crucible liners, ion source parts, ionization and thermocouple gauges, and Alcatel and Varian style leak detector filaments. Call 617-227-1133 for 2018 Fil-Tech Catalog or email paula@filtech.com or visit www.filtech.com with online ordering.

Fil-Tech
Boston, MA
http://www.filtech.com/
Contact: Paula L. Becker
Tel: 617-227-1133
Email: paula@filtech.com

Santovac 5 from Fil-Tech

Fil-Tech stocks Santovac 5 in 65cc, 100cc and 500 cc sizes at a savings. Santovac 5 provides vacuums in the 10-10 Torr range with exceptionally low vapor pressure and back streaming. It is excellent for applications that must be free of silicones or those requiring ultra-high, clean vacuums. We also offer hydrocarbon oils FT19, FT20, FT21, FT70, FT77, and FTTW. Our fluids are appropriate for mechanical pumps, rotary piston pumps, roots blowers, and diffusion pumps. We stock Chemours Krytox 1500 and General Purpose PFPE inert fluids and PFPE greases including Electronic Grade EG2000 and EG3000, General Purpose Lubricants GPL, Low Vapor Pressure LVP and Aerospace Grade 240 series greases. We can reprocess your used PFPE fluids for a fraction of the cost of new fluids. Fil-Tech also stocks FT704 and FT705 diffusion pump fluid and Fil-Tech Fluid for increased bearing life in vacuum and semiconductor processes. Call 617-227-1133 for 2018 Fil-Tech Catalog or email paula@filtech.com or visit www.filtech.com and order online.

Fil-Tech
Boston, MA
http://www.filtech.com/
Contact: Paula L. Becker
Tel: 617-227-1133
Email: paula@filtech.com

Fil-Tech’s Bakeable Senor Heads

Introducing Fil-Tech’s Bakeable Sensor Heads to 300°C. We manufactures a complete line of vacuum hardware including single and dual feedthroughs on 1” bolts or 2 ¾” flanges, single and dual sensor heads with shutters, and sputter heads with internal oscillators in stainless steel and copper. Fil-Tech also manufactures custom sensors and feedthroughs. Fil-Tech manufactures Quality Crystals® in 6MHz and 5MHz styles with Gold, Longer Life Gold®, Stress Relieving Alloy®, and introducing Extreme Temperature Crystals that operate to 200°C. We supply electron beam emitter assemblies and parts for Temescal and Telemark guns including filaments, insulators, beam formers, anodes, electromagnetic coils, and OFHC copper crucibles and covers from stock. Fil-Tech supplies replacement parts for Veeco Commonwealth Mark I and II and Ion Tech, and Satisloh ion sources including filaments, insulators, gas distributors, anodes, and cathode tips. New online ordering at www.filtech.com, paula@filtech.com, or call 617-227-1133 for our 2018 Catalog.

Fil-Tech
Boston, MA
http://www.filtech.com/
Contact: Paula L. Becker
Tel: 617-227-1133
Email: paula@filtech.com

Fil-Tech’s Replacement Filaments for Alcatel Leak Detectors and FT704 Fluids

Fil-Tech, Inc. supplies replacement filaments for Alcatel, Agilent/Varian and CEC leak detectors. Fil-Tech’s Alcatel LD10 is a drop in replacement for Alcatel's original equipment part. The filament is welded to the slotted posts for greater reliability and longer life. Fil-Tech also supplies Agilent leak detector filaments and can rebuild your Agilent filaments on a repair exchange basis. Visit Fil-Tech for our complete line of vacuum measurement gauges, including ionization, thermocouple and convection gauges from stock. Fil-Tech supplies Chemours Krytox oils and greases, Santovac 5, and FT704, FT702 and FT705 silicone based fluids to replace the no longer available DC704, DC702 and DC705 fluids. Fil-Tech also offers Quality Crystals® in 6MHz and 5MHz, and electron beam gun and ion source replacement parts. For a complete listing of our parts, contact Fil-Tech for our 2018 catalog at 617-227-1133, paula@filtech.com or visit us and order online at www.filtech.com .

Fil-Tech
Boston, MA
http://www.filtech.com/
Contact: Paula L. Becker
Tel: 617-227-1133
Email: paula@filtech.com

Fil-Tech's Electron Beam Gun Emitter Assembly and Parts

Fil-Tech stocks parts for Temescal and Telemark electron beam guns, including filaments, insulators, beam formers, anodes, electromagnetic coils, and OFHC copper crucibles and covers. Fil-Tech has all size crucible liners in Graphite, Fabmate, Mo, W, VC, BN, Cu, Al2O3 and other materials. We also have replacement parts for Commonwealth and Ion Tech ion sources, including filaments, insulators, gas distributors in graphite, stainless steel and titanium, anodes, and cathode tips. Fil-Tech manufactures a complete line of Quality Crystals® in 6MHz and 5MHz, coated in Gold, Stress Relieving Alloy®, and Longer Life Gold and sensor head and feedthrough hardware. We stock a complete line of vacuum measurement gauges including ionization, thermocouple, convection and Pirani gauges, diffusion pump fluids including FT704, FT702, and FT705, and mechanical pump fluids including hydrocarbons and Chemours Krytox fluids and greases. For savings from stock, call Paula at 617-227-1133, paula@filtech.com , or order on line at www.filtech.com

Fil-Tech
Boston, MA
http://www.filtech.com/
Contact: Paula L. Becker
Tel: 617-227-1133
Email: paula@filtech.com

Fil-Tech’s Ion Source Replacement Parts

Fil-Tech stocks replacement parts for Veeco Commonwealth Mark I and II and Ion Tech, and Satisloh ion sources including filaments, insulators, gas distributors, anodes, cathode tips and replacement parts. We also stock parts for Temescal and Telemark electron beam guns, including filaments, insulators, beam formers, anodes, electromagnetic coils, and OFHC copper crucibles and covers. Fil-Tech has all size crucible liners in Graphite, Fabmate, Mo, W, VC, BN, Cu, Al2O3 and other materials. Fil-Tech manufactures a complete line of AT-cut 6MHz and 5MHz Quality Crystals® in Gold, Longer Life Gold®, and Stress Relieving Alloy® to measure your thin films. Gold offers low contact resistance and high chemical stability. Stress Relieving Alloy crystals dissipate stresses from deposited dielectrics to offer longer, jump free oscillation. We also manufacture sensor head hardware including single and dual feedthroughs on 1” bolts or 2-3/4” flanges, single and dual sensor heads, and sputter heads in stainless steel and Copper. Call 617-227-1133, paula@filtech.com, or www.filtech.com for online ordering.

Fil-Tech
Boston, MA
http://www.filtech.com/
Contact: Paula L. Becker
Tel: 617-227-1133
Email: paula@filtech.com

Fil-Tech’s Crucible Liners

Fil-Tech has all size crucible liners in Graphite, Fabmate, Mo, W, VC, BN, Cu, Al2O3 and other materials. Call for standard or custom sizes. We also stock parts for Temescal and Telemark electron beam guns, including filaments, insulators, beam formers, anodes, electromagnetic coils, and OFHC copper crucibles and covers. Fil-Tech manufactures a complete line of 6MHz and 5MHz Quality Crystals® in Gold, Longer Life Gold®, and Stress Relieving Alloy® to measure your thin films. Gold offers low contact resistance and high chemical stability. Stress Relieving Alloy crystals dissipate stresses from deposited dielectrics to offer longer, jump free oscillation. We manufacture sensor head hardware including single and dual feedthroughs on 1” bolts or 2-3/4” flanges, single and dual sensor heads, and sputter heads in stainless steel and Copper. We also supply replacement parts for Veeco Commonwealth Mark I and II and Ion Tech, and Satisloh ion sources including filaments, insulators, gas distributors, anodes, cathode tips and replacement parts. Call 617-227-1133, paula@filtech.com, or www.filtech.com for online ordering.

Fil-Tech
Boston, MA
http://www.filtech.com/
Contact: Paula L. Becker
Tel: 617-227-1133
Email: paula@filtech.com

Fil-Tech’s Vacuum Measurement Gauges

Fil-Tech offers a complete line of Bayard Alpert ionization gauge tubes with iridium or twin tungsten filaments, glass or kovar handles, and with optional Pt coatings or flanges. We also supply Nude gauges for BA or UHV applications. Fil-Tech stocks all style thermocouple gauges with 1/8” NPT threads, VCR fittings, and KF16 or KF25 flanges. We offer Convection Gauges, Mini Convection Gauges, and Convection Controllers that directly replace Convectron Gauges for competitive prices. We stock FT704 and FT705 diffusion pump fluids, Santovac 5, and Hydrocarbon fluids and Chemours Krytox mechanical pump fluids and greases. Fil-Tech offers Quality Crystals® in 6Mhz and 5MHz, electron beam gun replacement parts, crucible liners, ion source parts, ionization and thermocouple gauges, and Alcatel and Varian style leak detector filaments. Call 617-227-1133, paula@filtech.com, or www.filtech.com for savings and online ordering.

Fil-Tech
Boston, MA
http://www.filtech.com/
Contact: Paula L. Becker
Tel: 617-227-1133
Email: paula@filtech.com

Fil-Tech’s Liquid Plating Crystals

Fil-Tech manufactures 1” and .550”, 5MHz, Liquid Plating Crystals for measurement in liquid or gas environments. We can coat our crystals in Au, Ti, Pt, SiO2, Stainless, Al, Al2O3 and other materials. Call us for custom coatings. We also manufacture sensor heads for housing our Liquid Plating Crystals. We manufacture crystals for measurement in vacuum, 6MHz and 5MHz Quality Crystals® in Gold, Longer Life Gold®, Stress Relieving Alloy®, and Advanced Adhesion Alloy® and a complete line of sensor hardware including single and dual feedthroughs on 1” bolts or 2 3/4” flanges, single and dual sensor heads, and sputter heads in Stainless Steel or Copper. Fil-Tech stocks parts for Temescal and Telemark electron beam guns, crucible liners and replacement parts for Commonwealth and Ion Tech ion sources. We stock FT704 and FT705 diffusion pump fluids and Chemours Krytox mechanical pump fluids and greases. Call 617-227-1133, paula@filtech.com or www.filtech.com.

Fil-Tech
Boston, MA
http://www.filtech.com/
Contact: Paula L. Becker
Tel: 617-227-1133
Email: paula@filtech.com